Sparvar Graffiti Remover Spray Can 400 ml

• Sparvar graffiti-killer for the rapid removal of graffiti on most surfaces.
• Effective on shop fronts, garage doors, brickwork, stone, concrete, metalwork, masonry, wood, metal, ashphalt etc.
• High quality solvent-based graffiti remover propellant propane-butane, lead free, cadmium free, aromatic, biodegradable.
• Due to the strong solvent power of Sparvar graffiti-killer is a test on the contaminated surface absolutely required before widespread use.
• Test on an inconspicuous area if the surface cannot be damaged from the graffiti remover.
• Do not apply on vinyl-plastic or Styrofoam.
• The longer the exposure time of Sparvar graffiti Killers on contaminated surfaces, the stronger the base is attacked.
• For sensitive surfaces we recommend a short exposure time of about 30 seconds.
• Remove the unwanted graffiti as quickly as possible because a cured paint spray is more difficult to remove. In each case, a removal of unwanted graffiti is advised because otherwise opacity problems are foreseen with latex paints.
• Volume: 400 ml

Instructions:

Attention do the first check in an inconspicuous area for compatibility tests. Wipe with absorbent kitchen paper the grossest impurity. Then fill the area again with graffiti-killer spray and wipe with a water-soaked, lint-free cloth, the loosened paint particles. Repeat several times, depending on the degree of pollution. It is best to use solvent-resistant gloves to protect your hands.

Hazard Statements (CLP)

Signal word: Danger

Hazard Statements (H-codes)

• H222-229: Extremely flammable aerosol. Pressurized container: May burst if heated.
• H336: May cause drowsiness or dizziness.

Precautionary Statements (P-codes)

Prevention:

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P260: Do not breathe aerosol.
• P262: Do not get in eyes, on skin, or on clothing.
• P271: Use only outdoors or in a well-ventilated area.

Response:

• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Storage:

• P403: Store in a well-ventilated place.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.

Disposal:

• P501: Dispose of contents/container in accordance with local regulations.

Additional Labelling

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH018: May form explosive/flammable vapor-air mixtures during use.

SPRAY-COLOR GMBH, Merzenicher Weg 4, 52399 Merzenich, GERMANY, +49 2421 75085, [email protected], www.spraycolor.de