Shell Gadus S2 V220 1 Extreme pressure general purpose grease 18kg

Shell Gadus S2 V220 1 (NLGI 1) greases are high quality multipurpose, extreme-pressure greases based on a blend of high viscosity index mineral oils and a lithium hydroxystreate soap thickener and contain extreme-pressure and other proven additives to enhance their performance in a wide range of applications.

• Pack size: 18 kg bucket
• Also available in: 400 g cartridge, 180 kg barrel

Applications

• Heavy duty bearings served by centralised dispensing equipment
• Extreme-pressure gear grease for applications at normal ambient temperature
• Heavy duty plain and rolling element bearings operating under harsh conditions including shock loading in wet environments
• Low temperature greasing applications

Characteristics

• Outstanding Load Carrying Capacity 
• Shell Gadus S2 V220 greases contain special extreme pressure additives which enable them to withstand heavy and shock loads without failure of the lubricant film.
• Improved Mechanical Stability 
• This is particularly important in vibrating environments where poor mechanical stability can lead to grease softening with subsequent loss of lubrication performance and leakage.
• Good Resistance to Water Wash-out 
• Shell Gadus S2 V220 greases have been formulated to offer resistance to water wash-out.
• Oxidation Stability 
• Specially selected base oil components have excellent oxidation resistance. Their consistency will not alter in storage and they withstand high operating temperatures without hardening or forming bearing deposits.
• Anti- corrosion protection
• Shell Gadus S2 V220 greases have an affinity with metal and have the ability to protect bearing surfaces against corrosion, even when the grease is contaminated with water. 

Specifications, Approvals & Recommendations

• For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk.

Health, Safety & Environment

• Health and Safety ·
• Shell Gadus S2 V220 Grease is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained.
• Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water. Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/
• Hydraulic Brake Rubber Components
• Care should be taken to ensure that the grease does NOT come into contact with hydraulic brake rubber components. ·
• Protect the Environment
• Take used oil to an authorised collection point. Do not discharge into drains, soil or water

Technical specifications

NLGI Consistency	1
Soap Type	Lithium
Base Oil (Type)	Mineral
Kinematic Viscosity @40 C cSt IP 71 / ASTM D445	220
Kinematic Viscosity @100C cSt IP 71 / ASTM D445	19
Cone Penetration, Worked @25 C 0.1mm IP 50 / ASTM D217	310-340
Dropping Point 0 C IP 396	180

Shell Gadus S2 V220-1, Shell Gadus S2V220 1

 

Information on product safety (Manufacturer, Contact)

Shell Deutschland Oil GmbH, Suhrenkamp 71-77, 22335 Hamburg, GERMANY, +49 40 6324-6255, [email protected], www.shell.com