Perma PRO LC500 Lubricant cartridge with Staburags NBU 12/300 KP

Perma PRO LC500 Lubricant cartridge with Staburags NBU 12/300KP | N° 106769

Staburags NBU 12/300KP Long-term grease for rolling and plain bearings

• Rolling and plain bearing grease
• Good corrosion protection
• Good pressure absorption
• Resistant to water
• Long-term grease
• Reliable wear protection

Technical specifications

• Chemical composition, type of oil: mineral oil
• Lower service temperature: -20 °C
• Upper service temperature: 130 °C
• Colour space: brown
• Chemical composition, thickener: barium complex soap
• Worked penetration, DIN ISO 2137, 25 °C, lower limit value: 285 x 0.1 mm
• Worked penetration, DIN ISO 2137, 25 °C, upper limit value: 315 x 0.1 mm
• Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value: 5000 mPas
• Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value: 9000 mPas
• Density at 20 °C: ca. 0,97 g/cm³
• Drop point, DIN ISO 2176, IP 396: >= 220 °C
• Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C: ca. 220 mm²/s
• Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C: ca. 18 mm²/s

Applications

• STABURAGS NBU 12/300 KP is a rolling bearing grease for longterm and lifetime lubrication of drafting equipment in spinning machines (upper and lower rollers), tension and eccentric rollers, cardan shafts and rolling bearings in fans and ventilation systems. 

---

Perma PRO ​Multi-Point Lubrication Systems:

PRO MP-6

• PRO MP-6 is a battery operated multi-point lubrication system.
• The MP-6 distributor discharges directly without pressure loss and enables tube extensions up to 5 m. 
• PRO MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems in robots.
• Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.
• Power supply: Battery PRO B

PRO C MP-6

• PRO C MP-6 can also be operated in IMPULSE mode.
• The impulse for a lubricant discharge can be PLC controlled.
• Power is supplied via the machine and can be PLC monitored and controlled.
• PRO C MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems (with same size runner blocks) in robots.
• Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.
• Power supply: External: 15–30 V

PRO LINE

• PRO LINE is a special multi-point lubrication system for linear guides. 
• Main applications for the multi-point lubrication system perma PRO LINE are linear guides.
• Application fields range from various linear guide and drive units in all kinds of industries – from automotive to paper. Other applications are roller and sliding bearings, open gears and spindles.
• Power supply: Battery PRO B

PRO C LINE

• PRO C LINE is a special multi-point lubrication system with 1 – 6 outlet connections for linear guides
• PRO C LINE receives its power from the machine and can be monitored and controlled via PLC.
• Main applications for the multi-point lubrication system perma PRO C LINE are linear guides.
• Application fields range from various linear guide systems and drives in the automotive industry to the paper industry. Other applications are roller and sliding bearings, open gears and spindles.
• Power supply: External: 15–30 V

 

Information on product safety (Manufacturer, Contact)

perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0, [email protected]