Motorex COOL-CORE FLUID Coolant additive for motor spindle systems 5L
€ 119,94
- Description
- FAQ
- Additional information
- Reviews (6)
Description
Motorex COOL-CORE FLUID is used as an anti-corrosion additive in motor spindle cooling systems. The substances it contains passivate the various materials and provide long-term protection against corrosion. COOL-CORE FLUID is particularly useful for problem-free cooling of drive shafts where high-power fast-turning motor spindles are used. The additive can naturally also be used in systems that operate under less heavy loads.
Application
- Only drinking water is acceptable for use when preparing COOL-CORE FLUID and this water must not exceed the following limits:
- Water hardness 3.6 mmol/lÂ
- Chloride 100 ppmÂ
- Sulphate 100 ppm
- Mix one part of COOL-CORE FLUID with two parts (1/3:2/3) of drinking water. Only use clean containers for preparing the mixture. Pour the mixture into the prepared cooling system immediately.
- If these values are outside the permissible range, COOL-CORE READY must be used. Where the fluid is used in optimum conditions and the instructions for use are complied with, the coolant can remain in use for up to four years.
- Important: Galvanised components or similar materials must not be used either in the cooling system or in the mixing or storage containers. An average operating temperature of 20-25°C will provide very effective long-term protection for elastomers. These advantageous conditions can be obtained using a cooling unit that will stabilise the temperature.Â
Characteristics
- Prevents electrochemical corrosionÂ
- Protects aluminium, ferrous and non-ferrous metalsÂ
- Low-maintenanceÂ
- Long-term protectionÂ
- Size: 5l
- Packaging type: canister
- Also available in: 20l canister, 200l barrel
Technical specifications
|  Colour |  blue |
|  Density at 20 °C |  1.055 g/ml |
|  pH value at 20 °C |  7.5 – 8.5 |
|  Pourpoint |  -50 °C |
|  Factor for hand-held refractometers |  1.34  %Brix-¹ |
|  Utilization temperature range |  4 – 80 °C |
| Â Water hazard class | Â WGK1Â |
Â
MOTOREX AG, Bern-Zürich-Strasse 31, 4901 Langenthal, SWITZERLAND, +41 62 919 75 75, [email protected], www.motorex.com
Downloads
Additional information
| Property | – |
|---|
6 reviews for Motorex COOL-CORE FLUID Coolant additive for motor spindle systems 5L
Add a review
JUST INQUIRING?
No stress, drop a message
Related Products
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
theresa_x –
Packaging was slightly damaged, but the product is excellent. Pleasant to use at home. Perfect for my needs; I couldn’t be happier.
Charlotte K. –
No unpleasant smell, which I really appreciate.
isabella.xo –
Super fast delivery, thank you. Very satisfied, it’s even better than I expected. Excellent product, worth every cent.
andreas_s –
Easy to assemble.
David –
Super practical. Received in perfect condition. Better quality than I expected. Great value for money.
dominik_s –
No complaints so far. 100% recommended. Works perfectly. Everything was smooth and fast.