Klübersynth R 42-111 Fully synthetic speciality grease for seals 1kg

 143,94

SKU: ID51e5d3f5b7

Klübersynth R 42-111 Fully synthetic speciality grease for seals 1kg

 143,94

In stock

Description

Klübersynth R 42-111 Optimised lubrication of heavily loaded radial shaft seals | N° 094119
  • Your gearboxes contain numerous seals whose long-term functioning is essential for low-friction operation. Any leakage leads to time-consuming and expensive maintenance operations.
  • Klübersynth R 42-111 was especially developed for the optimised operation of radial shaft seals and to facilitate proper seal assembly.
  • The use of fully synthetic base oils enables for-life lubrication, especially at high temperatures. The particular mix of base oils used leads to extraordinarily good compatibility with many frequently used elastomers (NBR, ACM, FKM) and plastics.
  • Klübersynth R 42-111 lubricates the seal during start-stop operation until the (gear) oil reaches the seal. It also improves seal lip wetting by the oil. Dirt and moisture are reliably prevented from entering the gearbox.
  • Temperature range: -40°C to +150°C 
  • Volume: 1 kg can 
  • Also available in: 400 g cartridge, 45 g tube, bucket 25kg
Benefits for your application
  • Optimised lubrication of heavily loaded radial shaft seals
    • Extends the service life of your seals
    • Enables reliable lubrication in start-stop operation
  • Easier seal assembly
  • Longer component availability due to reduction of leakage
  • Versatile uses due to excellent compatibility with elastomers
Applications
  • Klübersynth R 42-111 is extremely well suitable for the lubrication of seals and plastics that are often used in gearboxes and motors:
    • Radial shaft seals made of FKM, NBR, ACM
    • O-ring seals made of NBR, HNBR or FKM
    • Plastics such as POM or PA
Application notes
  • Klübersynth R 42-111 has been tested and approved for contact-free greasing in minimum dosing quantities starting from 0.1 mg via electro-pneumatic jet valves. If the lubricant is to be pumped and applied via automatic systems, or intended for series application, the correct function must be checked with the equipment manufacturer in advance.
Technical specifications
 Colour space  brown
 Chemical composition, type of oil  ester oil
 Chemical composition, type of oil  synthetic hydrocarbon oil
 Chemical composition, thickener  special lithium soap
 Lower service temperature  -40 °C / -40 °F
 Upper service temperature  150 °C / 302 °F
 Density at 20 °C  approx. 0.92 g/cm³
 Drop point, DIN ISO 2176, IP 396  >= 250 °C
 Flow pressure of lubricating greases, DIN 51805-2, test temperature: -40 °C  <= 700 mbar
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C  approx. 110 mm²/s
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C  approx. 14 mm²/s

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Downloads

Additional information

Property

8 reviews for Klübersynth R 42-111 Fully synthetic speciality grease for seals 1kg

  1. olivier_75

    Perfect from start to finish.

  2. Stefan M.

    Fast shipping, great service. Product as expected. Everything was smooth and fast. Very easy to use.

  3. enrico_s

    Very stable. Practical and functional. Delivered earlier than expected.

  4. Dylan

    Punctual service. Clear recommendation. Simply excellent.

  5. Penelope

    Perfect for my needs, couldn’t be happier. Pleasant to use at home. Easy to use, no mess at all.

  6. maja.bln

    Not too big, not too small, just right. Very effective, I noticed a change in just a week. Really noticed a difference after using it!

  7. joshua99

    Feels durable and well built.

  8. raffaele88

    Recommended. Easy to assemble. Exactly as in the pictures.


Add a review

JUST INQUIRING?

No stress, drop a message

    You are inquiring about:

    Related Products