



Klübersynth PEG 46-121 Special grease for enclosed gear drives 1kg can
5 out of 5
€ 117,43
SKU: IDe3c4e0e429

Klübersynth PEG 46-121 Special grease for enclosed gear drives 1kg can
€ 117,43
In stock
- Description
- FAQ
- Additional information
- Reviews (15)
Description
Klübersynth PEG 46-121 Special grease for the lubrication of enclosed gear drives | N° 027041
- Synthetic polyglycol oil based special grease with NLGI grade 1
- Temperature range: -50°C to +120°C
- Volume: 1kg can
- Also available in: 25kg bucket, 180kg drum
Benefits for your application
- The good wear protection of both the gears and the rolling bearings ensures a long service life of the components
- The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricating film even at elevated and high temperatures
- Much longer service life than mineral oils due the excellent ageing und oxidation stability of the synthetic base oil used in Klübersynth PEG 46 greases: Thus maintenance intervals can be extended and in certain cases even lifetime lubrication is possible
- The excellent friction behaviour of the polyglycol base oil reduces power losses and improves efficiency
Applications
- Klübersynth PEG 46 greases were developed especially for the lubrication of spur gears, bevel gears, planetary gears and worm gears with material pairings steel/steel or steel/brass in small enclosed gear drives.
- Klübersynth PEG 46 greases can also be used for the lubrication of ball and roller guides, rolling and plain bearings as well as toothed couplings.
Application notes
- Immersion lubrication of gears operating at circumferential speeds up to approx. 10 m/s is possible if NLGI grade 00 is used. Sufficient heat dissipation is essential. Depending on the operating conditions higher circumferential speeds are possible. The dynamic stresses of design elements made of aluminium or aluminium alloys may lead to increased wear. If necessary, wear tests should be carried out.
Technical specifications
NLGI grade, DIN 51818 | 1 |
Lower service temperature | -50 °C / -58 °F |
Upper service temperature | 120 °C / 248 °F |
Colour space | brown |
Texture | homogeneous |
Density at 20 °C | approx. 0.98 g/cm³ |
Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 340 x 0.1 mm |
Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 310 x 0.1 mm |
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C |
approx. 120 mm²/s |
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C |
approx. 20 mm²/s |
Drop point, DIN ISO 2176, IP 396 | >= 180 °C |
Hazard Information (CLP)
Signal word: Warning.
Hazard Statements (H-phrases)
- H317: May cause an allergic skin reaction.
Precautionary Statements (P-phrases)
Prevention:
- P272: Contaminated work clothing should not be allowed out of the workplace.
- P280: Wear protective gloves.
Response:
- P302 + P352: IF ON SKIN: Wash with plenty of water and soap.
- P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
- P362 + P364: Take off contaminated clothing and wash it before reuse.
Hazardous Components for Labeling
- Molybdenum trioxide, reaction products with Bis [O,O-bis(2-ethylhexyl)] hydrogen dithiophosphate
- Condensation products of fatty acids, tall oil with 2-amino-2-ethylpropanediol
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Additional information
Property | – |
---|
15 reviews for Klübersynth PEG 46-121 Special grease for enclosed gear drives 1kg can
Add a review Cancel reply
JUST INQUIRING?
No stress, drop a message
Related Products


This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page


This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
Klüber Special lubricants
Klüber LAMORA D 68 Lubricating oils for slideways 200L drum
5 out of 5
€ 4843,91


This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page


This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
Owen K. –
Better than I thought; I’m satisfied. Everything works perfectly so far. Punctual service. Fast and courteous service.
tommaso_it –
Product as expected. Met my expectations. Very durable.
david_de –
Great purchase, thank you. Works great. Arrived as promised.
maja.bln –
Pleasant to use at home. Looks even nicer in real life. Great product, worth every cent. Packaging was slightly damaged, but the product is excellent.
Filippo S. –
Perfect from start to finish.
Caroline Z. –
Better than anything else I’ve tried before. This solved my problem completely! Not too big, not too small, just right. Perfect for my needs; I couldn’t be happier.
charlotte_fr –
Perfect for my needs; I’m very satisfied. A friend recommended it and I’m so glad I ordered. Very effective, I noticed a change in just a week. The quality surprised me in a good way.
ginevra_b –
Not too big, not too small, just perfect.
Sébastien R. –
Everything as expected.
cedric_fr –
Great service and product. Exactly as described.
laura_ma –
A friend recommended it and I’m so glad I ordered.
Niklas N. –
Fast shipping and good quality. Very good experience. Very fast shipping.
pietro88 –
Great purchase, thank you. Packaging was excellent. Very robust product.
claudia_it –
Super fast delivery, thank you. Very satisfied, better than I expected. Been using it for 2 weeks and already see results! Very satisfied, better than expected.
edoardo_it –
Arrived right away, excellent service. Everything as expected. Perfect in every detail.