Klübersynth HBE 94-401 Synthetic heavy-duty long-term lubricant 1kg
€ 102,90
- Description
- FAQ
- Additional information
- Reviews (8)
Description
Synthetic heavy-duty grease for long-term lubrication
- As a manufacturer or operator of modern installations operating at high temperature, you need to protect components subject to high loads and with a high percentage of sliding friction reliably against wear and corrosion, even when they are not relubricated continuously (e.g. sealed rolling bearings). With Klübersynth HBE 94-401 we offer you a lubricating grease
based on high-quality synthetic base oil and a special calcium complex soap thickener. This combination enables the formation of a lubricating film with high resistance to mechanical
loads providing excellent wear protection. Moreover, Klübersynth HBE 94-401 is resistant to water and has a good sealing effect due to the special thickener component used. Are
your components subject to strong oscillations? With its very good antiwear properties, Klübersynth HBE 94-401 meets this challenge too. - Size: 1kg can
- Available in 400g cartridge, 1kg can, 25kg bucket
Benefits
- Very good wear protection,
- Excellent corrosion protection
- Excellent water resistance
- Reduced maintenance costs due to extended relubrication intervals or lifetime lubrication, even at elevated temperatures due to synthetic grease technology
Application
- loaded rolling and plain bearings at high temperatures, e.g. in the steel industry.
This special lubricating grease meets the complex requirements of your for-life lubricated components, e.g. in
– support rollers in continuous casting installations
– conveyor roller bearings in continuous furnaces
– support roller bearings in pickling and tin plating
– plain bearings of forging presses - Due to its excellent wear resistance this lubricating grease can also be used for roller bearings in wood pellet presses.
Product data
| Article number | 4295 |
| Chemical composition, type of oil | synthetic hydrocarbon oil |
| Chemical composition, thickener | calcium complex soap |
| Lower service temperature | -35 °C / -31 °F |
| Upper service temperature | 160 °C / 320 °F |
| Colour space | brown |
| Texture | long-fibred |
| Texture | homogeneous |
| Density at 20 °C | approx. 0,93 g/cm³ |
| Flow pressure of lubricating greases, DIN 51805-2, test temperature: -35 °C | <= 1 400 mbar |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 290 x 0,1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 320 x 0,1 mm |
| Speed factor (n x dm) | approx. 300 000 mm/min |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 4 000 mPas |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 8 000 mPas |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 400 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 40 mm²/s |
| Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water | <= 1 corrosion degree |
| Oil separation, DIN 51817 N, after 7 d/40 °C | <= 3 % by weight |
| Drop point, DIN ISO 2176, IP 396 | >= 230 °C |
| Four-ball tester, welding load, DIN 51350 pt. 04 | >= 2 800 N |
| Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating | 0 – 90 |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. | 24 months |
Hazard information (CLP)
Signal word: Warning.
Hazard statements (H-phrases)
- H319: Causes serious eye irritation.
Precautionary statements (P-phrases)
Prevention:
- P264: Wash skin thoroughly after handling.
- P280: Wear eye protection / face protection.
Response:
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337 + P313: If eye irritation persists: Get medical advice / attention.
Additional labelling (EUH-phrases)
- EUH208: Contains Benzenesulfonic acid, C10-16-alkyl derivs., calcium salts; Condensation products of fatty acids, tall oil with 2-amino-2-ethylpropanediol. May produce an allergic reaction.
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Additional information
| Property | – |
|---|
8 reviews for Klübersynth HBE 94-401 Synthetic heavy-duty long-term lubricant 1kg
Add a review
JUST INQUIRING?
No stress, drop a message
Related Products
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
clement88 –
Feels durable and well built. Super practical.
evelyn_sky –
Perfect for my needs; I’m very satisfied.
harper23 –
A friend recommended it; I’m very happy with the purchase.
Charlotte –
Very satisfied, better than I expected. Very fast delivery, thank you. Been using it for 2 weeks and already see results! Packaging slightly damaged, but the product is excellent.
olivier_75 –
Everything perfect, thank you. Easy to use and very practical. Everything’s great. Satisfied with the quality.
emma_berlin –
I was skeptical, but now I order regularly. Super fast delivery, thank you.
chloe_23 –
No unpleasant smell, which I really appreciate.
Julie J. –
Very satisfied, better than I expected. Perfect for my needs, couldn’t be happier.