Klübersynth HB 74-401 Synthetic high temperature grease 370g
€ 50,34
- Description
- FAQ
- Additional information
- Reviews (15)
Description
Description
- Klübersynth HB 74-401 is a lubricating grease based on a high-quality synthetic base oil thickened with a polyurea.
- This combination enables long-term lubrication over a wide temperature range.
- In addition, good wear protection under high loads is achieved due to the high base oil viscosity and special additives.
Benefits for your application
- Extended component life due to good wear and corrosion protection
- Cost reduction possible due to longer relubrication intervals, even at higher temperatures, based on the synthetic grease concept
- Type reduction possible due to the versatile usability over a wide temperature range
Application areas
- Klübersynth HB 74-401 is primarily used in roller and plain bearings at high temperatures, e.g. in the steel or cement industry.
Possible areas of application:
- Rollers in continuous casting plants
- Transport roller bearings in continuous furnaces
- Roller-roller bearings in vertical mills
- Pinion bearing
Application Notes
- Klübersynth HB 74-401 can be applied with a spatula, brush and grease gun or with standard central lubrication systems.
- Ideally, before greasing with Klübersynth HB 74-401, the lubricating point should be cleaned and the old grease removed.
- If it is not possible to clean the lubrication point for technical reasons, the grease can be replaced by more frequent relubrication in the initial period after the changeover.
Technical specifications
| Article number | 004282 |
| Colour space | beige |
| Texture | homogeneous |
| Texture | fibrous |
| Lower service temperature | -40 °C |
| Upper service temperature | 200 °C |
| NLGI grade, DIN 51818 | 1 |
| Density at 20 °C | approx. 0.85 g/cm³ |
| Drop point, DIN ISO 2176, IP 396 | >= 220 °C |
| Flow pressure of lubricating greases, DIN 51805, test temperature: -55 °C | <= 1 400 mbar |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 310 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 340 x 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 24 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 4.6 mm²/s |
| Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water |
<= 1 corrosion degree |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. |
36 months |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Additional information
| Property | – |
|---|
15 reviews for Klübersynth HB 74-401 Synthetic high temperature grease 370g
Add a review
JUST INQUIRING?
No stress, drop a message
Related Products
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
Olivia F. –
Very effective; noticed a change after just one week. I was skeptical, but now I order regularly.
David T. –
Received quickly. Very stable. No issues at all so far. Easy to use and very practical.
Sara –
Surprisingly good quality for the price. It completely solved my problem! I’ve been using it for 2 weeks and already see results! The quality surprised me in a good way.
greta_sonne –
I’ve been using it for 2 weeks and I already see results!
sophie_rose –
Pleasant to use at home.
Abigail –
I noticed a difference after a short time! Packaging was slightly damaged, but product is excellent. Super fast delivery, thank you.
Layla O. –
I’ve been using it for 2 weeks and I already see results! Very satisfied, better than expected. Better than anything I’ve tried so far.
Markus J. –
Great value for money. Recommended. Excellent product. Everything’s great.
maelys88 –
Been using it for 2 weeks and already see results! No unpleasant smell, which I really appreciate.
Leonardo U. –
Great purchase, thank you. Delivery faster than expected.
Giorgia –
Not too big, not too small, just right. Easy to use, without making a mess.
Noah –
Excellent workmanship.
stephane75 –
Simple to install.
marine_fr –
Very effective; noticed a change after just one week. Very satisfied, better than expected. Surprisingly good quality for the price.
Simona T. –
The quality surprised me in a good way.