Klübersynth EG 4-150 Synthetic high-performance gear oil 1 Litre
€ 69,54
- Description
- FAQ
- Additional information
- Reviews (14)
Description
Synthetic high-performance gear oil
- Klübersynth EG 4 is a fully synthetic high-performance gear oil based on polyalphaolefin satisfying the requirements of many gears.
- Klübersynth EG 4 offers a high scuffing strength of API GL-4. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations. The good wear protection of the gear components ensures that their calculated service life is achieved, leading to lower maintenance and repair costs.
- Klübersynth EG 4 offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. The product’s low foaming tendency and anti-corrosive properties enable problem-free gear operation. Klübersynth EG 4 is neutral towards most sealing materials such as NBR or FKM. Oil leakage leading to contamination is prevented. It also shows good demulsifying behaviour.
- The good viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range. Therefore, a single viscosity grade can cover both low and high temperatures in many applications. The optimised friction behaviour enabled by the carefully
selected base oils reduces power loss and improves gear efficiency. - By using Klübersynth EG 4 you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you.
- Content: 390ml tin
- Available in 390ml tin, 19l canister
Benefits:
- High scuffing protection
- Good wear protection
- Excellent ageing and oxidation resistance
- Wide service temperature range due to good viscosity-temperature behaviour
- Low foaming tendency
- Energy savings due to optimised friction behaviour
- Very good corrosion protection
Application:
- Klübersynth EG 4 was especially developed for the lubrication of heavily loaded spur, bevel and planetary gears. It can also be used for the lubrication of worm gears.
- Klüberoil EG 4 can also be selected for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.
Application notes:
- Klübersynth EG 4 can be used for immersion, immersion circulation and injection lubrication.
- The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible. When using automatic lubricating systems, please note the manufacturer’s instructions regarding the maximum permissible viscosity. The low-viscosity varieties are also used for oil mist lubrication.
- Klübersynth EG 4 is miscible with mineral oils. However, for the Klübersynth EG 4 oil to deliver its full performance, any residues of a previously used mineral oil should not exceed 5 % in quantity.
- For use at permanent temperatures of 80 °C max., seals made of NBR may be used. For higher temperatures, seals made of FKM should be chosen. It should be noted that elastomers from one or several manufacturers can behave differently; therefore tests should be performed.
- For checking the contact pattern during running-in, the inspection paint Klübertop P 39-462 Spray (Art. No. 081295) can be used.
Product data:
| Article number | 12220 |
| ISO viscosity grade, DIN ISO 3448 | 150 |
| AGMA number | 4 EP |
| Lower service temperature | -35 °C / -31 °F |
| Upper service temperature | 140 °C / 284 °F |
| Density, DIN 51757, 20 °C | approx. 0,87 g/cm³ |
| Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 150 mm²/s |
| Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 18 mm²/s |
| Viscosity index, DIN ISO 2909 | >= 130 |
| Pour point, DIN ISO 3016 | <= -39 °C |
| Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus | >= 200 °C |
| Foam test, ASTM-D 892, ISO 6247, sequence I/24 °C | <= 100/10 ml |
| Foam test, ASTM-D 892, ISO 6247, sequence II/ 93.5 °C | <= 100/10 ml |
| Foam test, ASTM D 892, ISO 6247, sequence III/24°C | <= 100/10 ml |
| FZG scuffing test, DIN ISO 14635-1, A/8.3/90, scuffing load stage | >= 14 |
| FZG scuffing test, based on DIN ISO 14635-1, A/16.6/90, scuffing load stage | >= 12 |
| API scuffing load capacity | API GL 4 |
| FAG FE8 rolling bearing test, DIN 51819-3, D 7,5/80-80, wear of rolling element | <= 30 mg |
| FAG FE8 rolling bearing test, DIN 51819-3, D 7,5/80-80, wear of cage | <= 200 mg |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. | 60 months |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Additional information
| Property | – |
|---|
14 reviews for Klübersynth EG 4-150 Synthetic high-performance gear oil 1 Litre
Add a review
JUST INQUIRING?
No stress, drop a message
Related Products
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
Jade B. –
The quality pleasantly surprised me. No unpleasant smell, which I really appreciate. This solved my problem completely!
Tobias N. –
Punctual service. Well packaged and secure. Very good experience.
tyler_xo –
Very robust product.
hugo_fr –
Punctual service.
Nathalie O. –
Not too big, not too small, just perfect. Super fast delivery, thank you.
Amelie S. –
Pleasant to use at home.
Chloé –
Pleasant to use at home. Solved my problem completely! Very fast delivery, thank you.
vincent_fr –
Super practical. Perfect, nothing to say. Better quality than I expected.
angela_b –
Very fast delivery, thank you.
Marie –
Easy to use, no mess at all. No unpleasant smell, which I really appreciate. Looks even nicer in real life. The quality pleasantly surprised me.
Markus –
Excellent workmanship. Good quality at a fair price. Very fast shipping. Feels durable and well built.
giovanni88 –
Great customer support. Everything works perfectly so far. Works perfectly. Exactly as described.
luis88 –
Everything perfect, would buy again.
Franziska Z. –
Feels nice to use at home.