Klüberfood NHT1 1-18 Heat transfer oil for food industry 20L
€ 947,94
- Description
- FAQ
- Additional information
- Reviews (7)
Description
Klüberfood NHT1 1-18 Premium heat transfer fluid for the food-processing and pharmaceutical industries | N° 029098
- Klüberfood NHT1 1-18 is based on highly refined hydrocarbons avoiding impurities that can occur in mineral oils. These impurities can initiate degradation of the oil and form carbon buildup on heater surfaces. Therefore the high purification level increases thermal stability and reduces fouling of the oil. As a consequence Klüberfood NHT1 1-18 allows you to reduce maintenance activities and extended oil change intervals can be achieved.
- The low base oil viscosity of Klüberfood NHT1 1-18 enables fast startups of your heating systems. In addition, its low viscosity and high density make Klüberfood NHT1 1-18 a highly efficient heat transfer fluid.
- Temperature range: -3°C to +330°C
- Volume: 20 l canister
- Also available in: 200 l barrel
Benefits for your application
- High process reliability due to NSF HT1 and NSF H1 registration as well as ISO 21469 certification
- Extended oil change intervals achievable due to highly refined napthenic base oil
- Reduced maintenance efforts and dependable operation due to excellent thermal stability
- Increased heat transfer efficiency
- Fast startups possible due to low base oil viscosity
Applications
- Klüberfood NHT1 1-18 is exclusively recommended as a closed-loop heat transfer fluid. Thanks to its NSF HT1 registration, Klüberfood NHT1 1-18 is suitable for use as heat transfer fluid in the food and pharmaceutical industries. It can also be applied in various industries such as textiles, chemicals, automotive, asphalt, cement, wood, etc.
Application notes
- Klüberfood NHT1 1-18 can be applied in new systems without prior cleaning, except when required for reasons of product quality. Residues of varnishes, oils and others from the system installation are usually not enough to affect the fluid lifetime. Klüberfood NHT1 1-18 is compatible with common heat transfer fluids.
- The start-up procedure or cleaning process should be done in compliance with the documentation of the manufacturer of the heat transfer system. In the presence of inert gas, the operating time of this fluid may be considerably extended.
Technical specifications
| Article number | 0290980766 |
| Composition, type of oil | hydrated naphthenic mineral oil |
| Maximum film temperature | 342 °C |
| Minimum Operating Temperature, 20 mPas | 36 °C |
| Minimum Start-up Temperature, 300 mPas | -3 °C |
| Service temperature, upper limit, fired heaters | 315 °C |
| Service temperature, upper limit, others heaters | 330 °C |
| NSF H1, HT1 registration number | 156393 |
| Density, DIN 51757, 15.6°C | approx. 0.89 g/cm³ |
| Flash point, DIN EN ISO 2719, Pensky-Martens closed cup | ≥ 149 °C |
| Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C | approx. 20 mm²/s |
Klüberfood NHT1 1 18, Klüberfood NHT 1 1-18
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Additional information
| Property | – |
|---|
7 reviews for Klüberfood NHT1 1-18 Heat transfer oil for food industry 20L
Add a review
JUST INQUIRING?
No stress, drop a message
Related Products
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
isabella.xo –
No unpleasant smell; I really like that. Very satisfied, better than I expected.
ginevra_b –
Packaging slightly damaged, but the product is excellent. Looks even nicer in real life.
noah_s –
Simple and convenient.
sebastien_75 –
Just as it should be.
leah_blossom –
No unpleasant smell, which I really appreciate. Looks even nicer in real life.
marine_fr –
Very satisfied, better than expected. Pleasant to use at home. Feels nice to use at home.
charlotte_de –
Very satisfied, better than expected. Surprisingly good quality for the price.