Klüber Unisilkon L 250 L Grease for valves and fittings 60g tube
€ 53,94
- Description
- FAQ
- Additional information
- Reviews (9)
Description
UNISILKON L 250 L Special lubricating grease for drinking water, beverage and heating valves and fittings
- UNISILKON L 250 L is a special lubricant based on silicone oil and PTFE with high thermal stability. UNISILKON L 250 L offers good penetration ability in small lubrication gaps and lube points of difficult access. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries.
- UNISILKON L 250 L is resistant to cold and hot water, superheated steam up to approx. 130 °C as well as industrial cleaning agents and disinfectants. UNISILKON L 250 L is also resistant to pumpable foodstuffs and beverages like fruit juices, beer or milk products. UNISILKON L 250 L is not resistant to
- organic solvents or strong acid and alkaline solutions.
- UNISILKON L 250 L is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of UNISILKON L 250 L can contribute to increase reliability of your production processes.
- We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.
- Temperature range: -45°C to +160°C
- Volume: Tube 60g
- Also available in: Cartridge 500g, Can750 g, Bucket 30kg
Benefits for your application
- Proven effective in valves and fittings as well as adjusting mechanisms in the drinking water, beverage, sanitary and heating sectors
- Certified acc. to international standards for valves and fittings, e.g. DVGW-KTW, WRAS, ACS, AS 4020, NSF Standard 61 and NSF H1
- Long-term protection of seals and bearings owing to the lubricant’s good resistance to numerous media like disinfectants, cleaning agents, water, steam
Applications
- UNISILKON L 250 L is used as lubricating and sealing grease for:
- domestic valves & fittings for drinking water, (e.g. ceramic discs and piston cartouches, thermo regulators). As the lubricant’s viscosity is rather independent of service temperatures, UNISILKON L 250 L allows constant actuating forces within the whole cold/hot water range of e.g. single-lever mixer taps.
- valves and fittings of heating installations (e.g. thermoregulators, tap cocks, pressfit seals)
- UNISILKON L 250 L has also proven effective as assembly aid for radial shaft seals and packings in contact with cold or hot water and steam.
Application notes
UNISILKON L 250 L is neutral towards most metals, thermoplastics and elastomers. Owing to the many different elastomer and plastic compositions their compatibility should be checked prior to series applications. UNISILKON L 250 L can be applied by means of spatula, brush, usual metering devices or the tampon printing method. Please observe the material safety data sheet.
Technical specifications
| Article number | 022102 |
| NLGI grade, DIN 51818 | 3 |
| NSF-H1 registration | 141 714 |
| Chemical composition, type of oil | methyl silicone oil |
| Chemical composition, solid lubricant | PTFE |
| Lower service temperature | -45 °C / -49 °F |
| Upper service temperature | 160 °C / 320 °F |
| Color space | white |
| Texture | fibrous |
| Texture | homogeneous |
| Density at 20 °C | approx. 1.25 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 220 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 250 x 0.1 mm |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment:rotational viscometer | approx. 13 000 mPas |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 25 °C | approx. 1 350 mm²/s |
| Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C | 1 – 100 corrosion degree |
| Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating | <= 1 – 90 |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Klüber UNISILKON L250L, Klueber, Kluber UNISILKON L250 L, L 250L
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Additional information
| Property | – |
|---|
9 reviews for Klüber Unisilkon L 250 L Grease for valves and fittings 60g tube
Add a review
JUST INQUIRING?
No stress, drop a message
Related Products
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
Massimo –
Great value for money. Top product, would definitely recommend. Impeccable quality.
daniel99 –
Works flawlessly. Excellent quality. Top product, would definitely recommend. Excellent material.
matthieu_fr –
Very satisfactory. Product arrived well packaged. Very stable. Very easy to set up.
filippo88 –
Very fast shipping. Very satisfied with the purchase. Top product, top price. Exactly as in the pictures.
Annika K. –
Very satisfied, better than expected. This solved my problem completely! Easy to use, without making a mess. Very effective; I noticed a change in just one week.
luis88 –
Great item.
alberto_it –
Fits perfectly. Delivers what it promises.
michele88 –
Received in perfect condition. Everything perfect, thank you. Everything as described.
Sarah –
Pleasant to use at home. Packaging was slightly damaged, but product is excellent. Better than anything else I’ve tried before. Not too big, not too small, perfect.