Klüber STABURAGS NBU 8 EP Rolling bearing high-pressure grease 1kg tin
€ 155,94
- Description
- FAQ
- Additional information
- Reviews (12)
Description
Rolling bearing and high-pressure grease
- STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener.
- STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C.
- Content: 1kg can
- Available in 400g cartridge, 1kg can, 25kg bucket
Benefits:
- Good corrosion protection
- Good resistance to ambient media
- Good wear protection / EP properties
- Protects against tribo-corrosion
- High-pressure grease
Application:
- STABURAGS NBU 8 EP has proven efficient as a rolling bearing and high pressure grease protecting against wear.
- It is used in traction motors, journal bearings, electric motors, pumps, and tapered roller bearings.
Application notes:
- The product is applied by brush, spatula or conventional metering systems.
Product data:
| Article number | 017105 |
| NLGI grade, DIN 51818 | 2 |
| NSF-H2 registration | 135 684 |
| Chemical composition, type of oil | mineral oil |
| Chemical composition, thickener | barium complex soap |
| Lower service temperature | -20 °C / -4 °F |
| Upper service temperature | 140 °C / 284 °F |
| Color space | brown |
| Density at 20 °C | approx. 0.99 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 265 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 295 x 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 97 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 11.5 mm²/s |
| Speed factor (n x dm) | approx. 500 000 mm/min |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 5 500 mPas |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 9 500 mPas |
| Drop point, DIN ISO 2176 | >= 220 °C |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. |
60 months |
Labelling (REGULATION (EC) No 1272/2008)
Hazard pictograms:
Signal word : Warning
Hazard statements:
H302 + H332 Harmful if swallowed or if inhaled.
H302 + H332 Harmful if swallowed or if inhaled.
H317 May cause an allergic skin reaction.
Precautionary statements:
Prevention:
P264 Wash skin thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves.
Response:
Response:
P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell.
P333 + P313 If skin irritation or rash occurs: Get medical
advice/ attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
Hazardous components which must be listed on the label:
barium salts
Condensation products of fatty acids, tall oil with 2-amino-2-ethylpropanediol
pin-2(3)-ene
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Additional information
| Property | – |
|---|
12 reviews for Klüber STABURAGS NBU 8 EP Rolling bearing high-pressure grease 1kg tin
Add a review
JUST INQUIRING?
No stress, drop a message
Related Products
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
Pierre –
Very practical. Robust and well-made.
Francesco –
Easy to assemble. Very stable. Very easy to use. Works perfectly.
yann_fr –
Arrived as promised. Very happy with the purchase, works great. Works flawlessly. Would buy again.
johanna88 –
Super fast delivery, thank you. I noticed the difference right away! Pleasant to use at home.
Claudio –
Recommended. Packaging was excellent. Arrived on time. Good build quality and reliable.
aria.belle –
No unpleasant smell, which I really appreciate. Very effective; noticed a change after just one week. I noticed the difference right away! No unpleasant smell; I really like that.
Gabriele V. –
As expected, top-notch. Top product, top price.
Leon W. –
Everything OK. Everything as expected. Fast and secure delivery.
fabio_s –
Satisfied with the quality.
elena_h –
No unpleasant smell, which I really appreciate. I noticed a difference after a short time! A friend recommended it and I’m so glad I ordered. Very fast delivery, thank you.
Amelie –
Looks even nicer in person. I was skeptical, but now I’ll order regularly.
Yann A. –
Worth every cent. Very good experience. Great value for money. Good customer service.