Klüber STABURAGS NBU 12 MF High performance grease 25kg bucket

 5449,55

SKU: ID111f070c4d

Klüber STABURAGS NBU 12 MF High performance grease 25kg bucket

 5449,55

In stock

Description

High-performance lubricating greases for the long-term lubrication of rolling and plain bearings

  • STABURAGS NBU 4 MF and STABURAGS NBU 12 MF are black lubricating greases based on mineral oil for rolling and plain bearings subject to high loads. The barium complex soap thickener ensures good adhesion of the grease to the lube point and thus good resistance to moisture and aggressive media. Both greases contain special solid lubricants based on MoS2, which improve emergency lubrication properties under high temperatures or loads.and protects reliably against corrosion.
  • Size: 25kg bucket
  • Available in 400g cartridge ,1kg can, 25kg bucket

Benefits for your application:

  • Good pressure resistance in bearings subject to high loads
  • Long component life due to good wear protection
  • Trouble-free operation due to good sealing and corrosion protection
  • Less maintenance due to long-term lubrication
  • Emergency lubricating properties for improved functionality in the case of starved lubrication

Application:

  • STABURAGS NBU 4 MF has proven successful for the lubrication of high-speed rolling bearings in rolls, spindles, cam
    rollers and tensioning rollers. The grease is also used for bearings in compressors and deep drilling machines.
  • STABURAGS NBU 12 MF is used for highly loaded bearings, e.g. joints, spline shafts, couplings as well as pumps and
    electric motors, for example in wood drying chambers.
  • Both greases are also suitable for steel-on-steel material combinations in slideways and plain bearings.

Application notes:

  • STABURAGS NBU 4 MF / 12 MF are applied by brush, spatula or grease gun. For application via central lubrication systems, pumpability should be checked with the manufacturer beforehand. The friction points can be cleaned with standard detergents.

Product data:

Article number 17065
Chemical composition, solid lubricant molybdenum disulphide
Chemical composition, thickener barium complex soap
Chemical composition, type of oil mineral oil
Lower service temperature -15 °C / 5 °F
Upper service temperature 130 °C / 266 °F
Colour space black
Worked penetration, DIN ISO 2137, 25 °C, lower limit value 245 x 0,1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value 275 x 0,1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx.  220 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx.  19 mm²/s
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKFEMCOR), test duration: 1 week, distilled water 0 corrosion degree
Copper corrosion, DIN 51811, (lubricating grease), 24h/120 °C 1 – 120 corrosion degree
Drop point, DIN ISO 2176, IP 396 >= 220 °C
Four-ball tester, welding load, DIN 51350 pt. 04 >= 4 500 N
Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating <= 1 – 90
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 60 months

Hazard Information (CLP)

Signal word: Warning

Hazard Statements (H-phrases)
  • H302 + H332: Harmful if swallowed or inhaled.
  • H317: May cause an allergic skin reaction.
Precautionary Statements (P-phrases)
Prevention:
  • P264: Wash skin thoroughly after handling.
  • P271: Use only outdoors or in a well-ventilated area.
  • P280: Wear protective gloves.
Response:
  • P304 + P340 + P312: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
  • P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
  • P362 + P364: Take off contaminated clothing and wash it before reuse.
Hazardous Components for Labeling
  • Barium salts
  • 4-Ethyl-2-(8-heptadecenyl)-2-oxazolin-4-methanol
  • Pin-2(3)-ene

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Downloads

Additional information

Property

12 reviews for Klüber STABURAGS NBU 12 MF High performance grease 25kg bucket

  1. thomas_star

    Everything OK, recommended. Perfect for what I needed. Excellent service. Perfect in every detail.

  2. Carlo

    Easy to assemble. Quality is excellent.

  3. Joseph

    Easy to assemble. Very stable. Punctual service.

  4. cecilia_s

    I noticed the difference right away! Easy to use, without making a mess.

  5. chloe_rose

    Very effective, I noticed a change in just a week. This solved my problem completely! Easy to use, without making a mess. Not too big, not too small, just right.

  6. cristiano_it

    Reliable and stable. Works flawlessly. Excellent service. Just as it should be.

  7. federico_it

    Fast shipping and good quality. Excellent quality. Easy to assemble. Well packaged and delivered quickly.

  8. mia.liebe

    I was skeptical, but now I’ll order it regularly. Feels nice to use at home.

  9. Caleb V.

    Very easy to use. Product arrived well packaged. Exactly as described.

  10. Cristiano U.

    Arrived on time. Fast and courteous service. Excellent quality. Well made and durable.

  11. Yann

    Exactly what I was looking for. Fast and secure delivery. Exactly as described. Better quality than I expected.

  12. Anna O.

    I’ve been using it for 2 weeks and I already see results! Perfect for my needs; I couldn’t be happier. Feels nice to use at home. Solved my problem completely!


Add a review

JUST INQUIRING?

No stress, drop a message

    You are inquiring about:

    Related Products