



Klüber STABURAGS NBU 12 Bearing grease 25kg
5 out of 5
€ 2878,80
SKU: ID380dd4829a

Klüber STABURAGS NBU 12 Bearing grease 25kg
€ 2878,80
In stock
- Description
- FAQ
- Additional information
- Reviews (7)
Description
Lubricating greases with excellent wear resistance
- STABURAGS NBU 12 is lubricating greases based on mineral oil and barium complex soap. This product is resistant to very high specific surface pressure, thus ensuring good wear protection. In addition, it is resistant to corrosion, water and many diluted alkaline and acid solutions
- Content: 25kg bucket
- Available in 50g tube, 400g cartridge, 1kg can, 25kg bucket
Benefits for your application:
- Good corrosion protection
- Good resistance to ambient media
- Excellent wear protection
- Good resistance to tribo-corrosion
- Good load-carrying capacity
- Good sealing effect
Application:
- STABURAGS NBU 4 has been used successfully on highspeed rolling bearings exposed to humidity or ambient media. It is suitable for rolls, spindles, cam rollers, tensioning rollers and
motors. - STABURAGS NBU 12 is efficient on medium-speed rolling bearings subject to humidity or ambient media.It is used on water pumps, wheel bearings and motors; and in the textile industry, on all wet processing equipment such as washing, mercerising and dyeing machines.
Product data:
Article number | 17052 |
NSF-H2 registration | 135 689 |
Chemical composition, type of oil | mineral oil |
Chemical composition, thickener | barium complex soap |
Lower service temperature | -15 °C / 5 °F |
Upper service temperature | 130 °C / 266 °F |
Colour space | brown |
Density at 20 °C | approx. 0,99 g/cm³ |
Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 245 x 0,1 mm |
Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 275 x 0,1 mm |
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 220 mm²/s |
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 19 mm²/s |
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 9 000 mPas |
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 15 000 mPas |
Drop point, DIN ISO 2176, IP 396 | >= 220 °C |
Four-ball tester, welding load, DIN 51350 pt. 04 | >= 3 000 N |
Speed factor (n x dm) | approx. 350 000 mm/min |
Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating | <= 1 – 90 |
Flow pressure of lubricating greases, DIN 51805, test temperature: -15 °C | <= 1 600 mbar |
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. | 60 months |
Hazards Information (CLP)
Signal word: Warning.
Hazard Statements (H-phrases)
- H302 + H332: Harmful if swallowed or if inhaled.
- H317: May cause an allergic skin reaction.
Precautionary Statements (P-phrases)
Prevention:
- P264: Wash skin thoroughly after handling.
- P271: Use only outdoors or in a well-ventilated area.
- P280: Wear protective gloves.
Response:
- P304 + P340 + P312: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
- P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
- P362 + P364: Take off contaminated clothing and wash it before reuse.
Hazardous Components:
- Dibarium(2+) ion bis(9-(octadecylcarbamoyl)nonanoate) decanedioate
- 4-ethyl-2-(8-heptadecenyl)-2-oxazoline-4-methanol
- Pin-2(3)-ene
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Additional information
Property | – |
---|
JUST INQUIRING?
No stress, drop a message
Related Products


This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page


This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
Hobbock & Canisters
Klüber Grafloscon C-SG 1000 Ultra Operational lubricant 180 Kg barrel
5 out of 5
€ 6598,80


This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
Hobbock & Canisters
Klüber ISOFLEX PDL 300A High-performance grease for bearings 25kg
5 out of 5
€ 9782,29


This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
Hobbock & Canisters
Klüber ISOFLEX SUPER LDS 18 High-speed and smooth-running grease 25kg
5 out of 5
€ 4315,56
Ryan –
Fast shipping, perfect product. Fast and secure delivery. Clear recommendation. Exactly what I needed.
Jakob I. –
Well packaged and secure. Impeccable service. Top product, would definitely recommend. Fast shipping, great service.
Lorenzo Y. –
Simple to install.
theresa_x –
I was skeptical, but now I’ll order regularly.
isabell23 –
I’ve been using it for 2 weeks and I already see results! Really noticed a difference after using it!
Amandine –
Perfect for my needs, couldn’t be happier.
henry_sun –
Everything as expected. Very practical and easy to use. Exactly as described. Excellent service.