Klüber POLYLUB GLY 791 Special synthetic lubricating grease 1kg tin

 287,94

SKU: ID96e5d14cb0

Klüber POLYLUB GLY 791 Special synthetic lubricating grease 1kg tin

 287,94

In stock

Description

Special synthetic lubricating grease for plain bearings subject to high loads and temperatures

  • POLYLUB GLY 791 is based on a synthetic hydrocarbon oil, mineral oil and special lithium soap. It has been designed for friction reduction and wear protection of plain bearings and slideways with metal/metal or plastic/metal material pairings.
  • This special lubricant covers a wide range of operating conditions, from low to high speeds and loads, even in the case of fibre-reinforced plastic components and metal/plastic sliding pairings.
  • The lubrication of plastics is special in a number of ways . As the behaviour of metals and plastics differs in many aspects, the lubricant’s properties have to be adjusted to the plastic. Compared to many metals, plastics are relatively soft. Solid lubricants, which may achieve a positive effect on many metal friction points, can have a negative or no effect at all on plastic lube points. With the formulation of POLYLUB 791, Klüber Lubrication offers a product which is free of solid lubricant, but covers the many operating conditions mentioned above.
  • Owing to the many different plastic compositions, however, we recommend checking their compatibility particularly prior to series application.
  • Content: 1kg can
  • Available in 400g cartridge, 1kg can, 25kg bucket

Benefits for your application

  • For metal/metal and plastic/steel material pairings
  • Neutral towards many plastics and elastomers
  • Provides good wear protection to fibre-reinforced plastics
  • Good corrosion protection of metal mating surfaces

Application

  • Vehicles: Seat mechanisms, shock absorbers
  • Slideways, plain bearings: For many types of plain bearing designs. POLYLUB GLY 791 prevents stick-slip to a large extent, particularly in applications where normally a hydrodynamic film cannot form.
  • Owing to the good damping properties, noise and cracking is considerably reduced.

Application notes

  • POLYLUB GLY 791 is applied by brush, spatula or automatic metering systems. The use of central lubrication systems is possible in principle but should be checked in each individual case.

Product data

 NLGI grade, DIN 51818  1
 Lower service temperature  -40 °C / -40 °F
 Upper service temperature  150 °C / 302 °F
 Color space  orange
 Worked penetration, DIN ISO 2137, 25 °C, lower limit value  310 x 0.1 mm
 Worked penetration, DIN ISO 2137, 25 °C, upper limit value  340 x 0.1 mm
 Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value  9 000 mPas
 Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value  6 500 mPas
 Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration:
 1 week, distilled water
 <= 1 corrosion degree
 Drop point, DIN ISO 2176  >= 230 °C
 Oil separation, based on ASTM D 6184 [FTMS 791 C 321] after 30 h/150 °C  <= 9 % by weight
 Four-ball tester, wear factor, DIN 51350 pt. 05, 1 h/400 N, wear scar diameter  <= 0.9 mm
 Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened
 original container, approx.
 36 months

 


Hazard Information (CLP)

Signal word: Warning.

Hazard Statements (H-phrases)
  • H317: May cause an allergic skin reaction.
Precautionary Statements (P-phrases)
Prevention:
  • P272: Contaminated work clothing should not be allowed out of the workplace.
  • P280: Wear protective gloves.
Response:
  • P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
  • P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
  • P362 + P364: Take off contaminated clothing and wash it before reuse.
Hazardous Components:
  • Naphthenic acids, bismuth salts

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Downloads

Additional information

Property

15 reviews for Klüber POLYLUB GLY 791 Special synthetic lubricating grease 1kg tin

  1. Amélie

    Looks even nicer in real life. Perfect for my needs; I’m very satisfied.

  2. Lucie

    Looks even nicer in real life. The quality pleasantly surprised me.

  3. Ella

    Very fast delivery, thank you. A friend recommended it and I’m so glad I ordered.

  4. Sofia

    Very satisfied, better than expected.

  5. Christopher J.

    Fast delivery, good workmanship. Excellent quality.

  6. Sarah N.

    Very effective; noticed a change after just one week. Better than anything I’ve tried so far.

  7. Paula

    Very effective; noticed a change after just one week.

  8. Léa

    Perfect for my needs, couldn’t be happier.

  9. Rosa

    Not too big, not too small, just right. No unpleasant smell, which I really appreciate.

  10. Rémi

    Top product, would definitely recommend. Exactly as described.

  11. Rafael

    Simply excellent. Everything as expected. Top seller.

  12. Jade Y.

    Not too big, not too small, just right. Very satisfied, better than expected. I’ve been using it for 2 weeks and already see results!

  13. claire_jane

    Looks even nicer in real life. Great product, worth every cent.

  14. Tyler I.

    Everything perfect, thank you. Everything perfect and fast.

  15. lucie88

    Looks even nicer in person. Very effective; noticed a change after just one week. Feels nice to use at home.


Add a review

JUST INQUIRING?

No stress, drop a message

    You are inquiring about:

    Related Products