Castrol Tribol CH 1430 High-temperature chain oil 20L canister

Castrol Tribol™ CH 1430 (previously called Tribol 1430) high-temperature chain oil is formulated for the lubrication of oven chains for temperatures up to 240 °C (short term max. 270 °C). The low evaporation tendency of the high-quality aromatic ester synthetic base fluid ensures extended lubrication intervals as well as a clean and economic application.

Application

• Tribol CH 1430 high-temperature chain oil is especially recommended for chain lubrication at temperatures up to 240 °C with short term maximum temperature of 270 °C
• It is used for the lubrication of oven chains in lithographic printing plants and in the coating industry as well as in drying ovens in the automotive industry.
• It may be applied by drip, spray, splash and pressurized lubricating systems compatible with oils of this viscosity.

Advantages & Characteristics

• The good evaporation characteristics of Tribol CH 1430 can reduce the amount of lubricant required and / or extend the interval between re-application.
• Reduced application minimizes dripping or “blow-off”.
• Excellent fluid film and anti-wear properties control chain wear.
• Self-cleaning action eliminates the need to stop production periodically to clean equipment
• Dissolve and facilitates the removal of carbonaceous residues left by previous lubricants.
• Fire and explosion hazards are greatly reduced. The ignition temperature far exceeds that of petroleum products.
• Low residue forming properties – any residues formed are still fluid and have lubricating properties.
• Compatible with the following sealing materials: Fluoroelastomers, silicone rubber, nitrile rubber (with more than 30%, acrylonitrile) and EPDM-elastomers.
• Excellent wetting and adhesive properties.
• Cost reductions may be achieved by reduced friction, extended lubrication cycles, reduced soiling, decreased downtime for repairs and maintenance and longer service life of machine components.
• Viscosity of Tribol CH 1430 delivers excellent wetting of chain pins
• Contains anti-wear additives for additional protection in the areas of boundary and mixed friction lubrication and at high operating temperatures
• Rust and oxidation inhibitors protect chains from corrosion at standstill and extend the lubricant’s life. 

Technical specifications

• Density @ 15°C / 59°F ISO 12185/ ASTM D4052 kg/m³: 949
• Kinematic Viscosity @ 40°C / 104°F mm²/s: 150
• Kinematic Viscosity @ 100°C / 212°F mm²/s: 17.1
• Viscosity Index: 124
• Flash Point – open cup method °C/°F: 268/514
• Pour Point °C/°F: -33 / -27
• Volume: 20l canister
• Also available as: 60l barrel, 208l barrel
• GLIS number: 156D5C
• MSDS Code: 468658

Castrol Tribol CH™ 1430, CH1430, CH-1430

Hazard Information (CLP)

Signal word: Warning.

Hazard Statements (H-phrases)

• H319 – Causes serious eye irritation.

Prevention (P-phrases)

• P280 – Wear eye protection or face protection.
• P264 – Wash hands thoroughly after use.

Response

• P305 + P351 + P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337 + P313 – If eye irritation persists: Get medical advice/attention.

Additional Labeling Elements

• UFI: AV60-N0YS-S00P-RNNE

BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, [email protected], www.bp.com