Castrol Molub-Alloy OG 3710-0/00 Open Gear Mill Lubricant 18kg bucket

Castrol Molub-Alloy OG 3710-0/00 Mill lubricant NLGI 0-00

Castrol Molub-Alloy™OG 3710-0/00 (previously called Castrol Molub-Alloy 3710-0/00) is a heavy-duty lubricant formulated for open gear mill applications. It may be used in both raw and finish mill operations such as those found in coal, cement, copper and phosphate mills as well as in ball or rod mills. Formulated to address environmental concerns Castrol Molub-Alloy OG 3710-0/00 is free from lead, antimony, barium, bitumen and chlorinated solvents. The synthetic and petroleum oils used in Castrol Molub-Alloy OG 3710-0/00 are selected for their physical and chemical stability and for their exceptional serviceability over a wide temperature range. These fluids are compounded to flow readily in the film forming process, yet resist “squeeze out” and cling tenaciously even to gear teeth that mesh vertically. A proprietary blend of Castrol Molub-Alloy OG 3710-0/00 lubricating solids of selected grade and size distribution promote antiwear and load carrying properties beyond the capacity of conventional lubricants. The blend of synthetic and petroleum base fluids ensures excellent pumpability even at low temperatures. The high base oil viscosity assures sufficient film thickness at low speeds and high loads.

Application

• Castrol Molub-Alloy 3710-0/00 may be used from –30°C to +100°C. This is a general guideline and may be altered depending on application and conditions.
• Castrol Molub-Alloy 3710-0/00 is particularly suitable for service in the most severe conditions of dust as found in mill applications. It is designed to resist packing or hardening in the roots of gear teeth and in semienclosed gear cases.

Advantages

Technical specifications

• Color/appearance: Light, smooth
• Base thickener: Lithium
• Base oil base: Mineral oil, synthetic base oil
• Solid lubricants: Yes
• NLGI consistency class: 0 to 00
• Base oil properties Kinematic viscosity at +40 °C mm²/s: 2100
• Viscosity index: 139
• Flash point °C: > +200
• Fulling penetration Pw 60 1/10mm: 380 to 410
• Volume: 18kg bucket
• Also available as: 400ml spray can, 55kg barrel, 190kg barrel
• GLIS number: 1575BE
• MSDS code: 468749

Castrol Molub-Alloy OG 3710 0/0

Hazard Information (CLP)

• Hazard pictogram(s): Corrosion (eye damage symbol)
  Signal word: Danger
  

  Hazard statements (H-phrases)

  • H318 – Causes serious eye damage.

  Prevention (P-phrases)

  • P280 – Wear eye or face protection.

  Response

  • P305 + P351 + P338, P310 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or physician.

  Storage and Disposal

  • Not applicable (storage).
  • Not applicable (disposal).

BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, [email protected], www.bp.com