3M Scotch-Weld EC-9323-2 B/A Two Part Structural Adhesive 1l
€ 283,14
- Description
- FAQ
- Additional information
- Reviews (5)
Description
3M™ Scotch-Weld™ Structural Epoxy Adhesive EC-9323-2 B/A is a thixotrophic, sag-resistant, two component epoxy paste adhesive which cures at room temperature or with mild heat to form a tough, impact resistant structural bond. It has an excellent adhesion to a wide variety of substrates such as metals, glass, ceramics and plastics, incl. GFRP and CFRP.
Once cured it provides very high shear and peel strength over a wide temperature range, with excellent resistance to harsh environments and chemicals commonly encountered in aerospace applications. Typical applications are aircraft interior panel bonding, ditch and pot, insert, or bracket bonding. The product is available in a white and a black version.
Content: 1000 ml
Highlights
- Thixotrophic, non- sag, full room temperature processable,
- Available in duo-pack cartridge for easy and best processing.
- Toughened system providing very high shear and peel strength
- Excellent environmental resistance
Technical specifications
The following technical information and data should be considered representative or typical only and should not be used for specification purpose.
| General Properties | Part B | Part A |
| Color | White or Black | Off-white |
| Base | Modified epoxy | Modified amine |
| Consistency | Thixotropic paste | Thixotropic paste |
| Density | 1.04 g / cm³ | 1.03 g / cm³ |
| Solids | 100 % | 100 % |
| Viscosity | 250 Pas | 75 Pas |
| Mix ratio by weight (by volume) | 100 : 50 wt. (100 : 50 vol.) | 100 : 50 wt. (100 : 50 vol.) |
| Work life and open time at 23 ± 2 °C | > 120 minutes | > 120 minutes |
| Handling strength | 4 hours | 4 hours |
| Full cure cycle | 7 days at room temperature | 7 days at room temperature |
Hazard Information (CLP)
Signal word: Danger (Part A) / Warning (Part B)
Hazard Statements (H phrases)
- H314: Causes severe skin burns and eye damage. (Part A)
- H315: Causes skin irritation. (Part B)
- H317: May cause an allergic skin reaction. (Both Parts)
- H319: Causes serious eye irritation. (Part B)
- H336: May cause drowsiness or dizziness. (Part A)
- H410: Very toxic to aquatic life with long lasting effects. (Part A)
- H411: Toxic to aquatic life with long lasting effects. (Part B)
Safety Instructions (P phrases)
Prevention:
- P260B: Do not breathe dust. (Part A)
- P273: Avoid release to the environment. (Both Parts)
- P280B: Wear protective gloves/eye protection/face protection. (Part A)
- P280E: Wear protective gloves. (Part B)
Response:
- P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. (Part A)
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. (Both Parts)
- P310: Immediately call a POISON CENTER or doctor/physician. (Part A)
- P333 + P313: If skin irritation or rash occurs: Get medical advice/attention. (Part B)
- P391: Collect spillage. (Part B)
Additional Hazard Information
- EUH212: Warning! Hazardous respirable dust may be formed when used. Do not breathe dust. (Both Parts)
Other Hazards
- Individuals sensitized to amines may experience cross-sensitization with other amines. (Part A)
- This material does not contain substances that are considered PBT or vPvB. (Both Parts)
3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, [email protected], www.3m.com/msds
Downloads
Additional information
| Color | White, Black |
|---|
5 reviews for 3M Scotch-Weld EC-9323-2 B/A Two Part Structural Adhesive 1l
Add a review
JUST INQUIRING?
No stress, drop a message
Related Products
edoardo_it –
Very practical.
Victoria Q. –
I noticed the difference right away!
Audrey –
Packaging slightly damaged, but the product is excellent. I noticed a difference after a short time!
Christophe F. –
Perfect and functional.
francois_fr –
Exactly as described.