3M Scotch-Weld EC-2216 B/A Two-part Epoxy Adhesive grey 41.5ml
€ 58,74
- Description
- FAQ
- Additional information
- Reviews (8)
Description
3M™ Scotch-Weld™ EC-2216 B/A is a two-part flexible epoxy adhesive for structural bonding in aerospace and industrial applications.
- Pack size: 41.5 ml dual cartridge (3M ID 7100269534)
- Also available as: 250 ml tube set
Applications
- Flexible bonding of metals, plastics, glass, rubber, and ceramics
- Structural bonding in aerospace and defense industries
- Cryogenic applications (down to -253 °C)
- Bonds exposed to dynamic loads, vibration or shock
Features
- High peel and shear strength
- Excellent impact and vibration resistance
- Color-coded components for reliable mixing control
- Room-temperature or accelerated thermal curing
- Resistant to water, fuels, hydraulic fluids, and de-icing agents
- Meets DOD-A-82720 / MIL-A-82720 standards
Technical Data
| Physical Properties | |
|---|---|
| Color (cured) | Gray |
| Transparency | Opaque |
| Mix ratio B:A (volume / weight) | 2:3 / 5:7 |
| Consistency | Paste-like |
| Working time (100 g, 24 °C) | 90–120 minutes |
| Handling strength | 8–12 hours |
| Full cure at 23 °C | 7 days |
| Mechanical Properties | |
| Lap shear strength (aluminum, 23 °C) | 22 MPa (3200 psi) |
| T-peel strength | 25 piw (~4.4 N/mm) |
| Shore hardness D | 50–65 |
| Thermal Properties | |
| Service temperature range | -55 °C to +80 °C (continuous) (tested from -253 °C to +177 °C) |
| Thermal conductivity | 0.114 – 0.228 BTU·ft/ft²·h·°F (≈ 0.2 – 0.4 W/m·K) |
| Electrical Properties | |
| Dielectric strength | 408–630 V/mil |
Instructions for Use
- Clean and degrease bonding surfaces; abrade if necessary
- Mix resin and hardener thoroughly until color is uniform
- Apply and use within 90 minutes
- Allow to cure at room temperature or with heat acceleration
- Recommended bond line thickness: 3–5 mil
- Clean uncured material with MEK or similar solvents
Recommended Accessories
- Mixing nozzle: 3M Scotch-Weld EPX Static
- Dispensing gun: 3M Scotch-Weld EPX III
- 3M™ Primer EC-1945 B/A (for metals)
Storage & Shelf Life
- Store unopened in dry conditions at +16 °C to +27 °C
- Shelf life: 24 months in original packaging
3M Scotch-Weld EC2216, EC 2216B/A, aerospace epoxy adhesive
Hazard Information (CLP)
Signal word: Danger (Part A) / Warning (Part B)
Hazard Statements (H-statements)
- H315: Causes skin irritation. (Part A and B)
- H318: Causes serious eye damage. (Part A)
- H319: Causes serious eye irritation. (Part B)
- H317: May cause an allergic skin reaction. (Part A and B)
- H336: May cause drowsiness or dizziness. (Part A)
- H410: Very toxic to aquatic life with long lasting effects. (Part A)
- H411: Toxic to aquatic life with long lasting effects. (Part B)
Precautionary Statements (P-statements)
Prevention:
- P261A: Avoid breathing vapours. (Part A)
- P273: Avoid release to the environment. (Part A and B)
- P280B: Wear protective gloves/eye protection/face protection. (Part A)
- P280E: Wear protective gloves. (Part B)
Response:
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. (Part A and B)
- P310: Immediately call a POISON CENTER or doctor. (Part A)
- P333 + P313: If skin irritation or rash occurs: Get medical advice/attention. (Part A and B)
- P391: Collect spillage. (Part B)
Additional Labeling (EUH-statements)
- No additional EUH-statements provided.
Storage and Disposal
- No specific information on storage and disposal provided.
Other Relevant Information
- H- and P-statements differ for packaging below 125 ml. (Both parts)
Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,
3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, [email protected], www.3m.com/msds
Additional information
| Property | – |
|---|
8 reviews for 3M Scotch-Weld EC-2216 B/A Two-part Epoxy Adhesive grey 41.5ml
Add a review
JUST INQUIRING?
No stress, drop a message
Related Products
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
Elias G. –
Received quickly. Excellent product.
emma_roma –
Packaging was slightly damaged, but product is excellent.
leon88 –
Fast delivery and exactly as described.
Leonardo Z. –
Excellent workmanship.
moritz_s –
Great purchase, thank you. Excellent packaging. Exactly as in the pictures.
joseph88 –
Product arrived well packaged. Highly recommended. Everything went smoothly.
isabell23 –
A friend recommended it and I’m so glad I ordered.
Julius E. –
100% recommended. Impeccable quality.