3M Scotch-Weld 7260 FC NS Two-part Epoxy Adhesive non-sag black 400ml
€ 91,14
- Description
- FAQ
- Additional information
- Reviews (7)
Description
3M™ Scotch-Weld™ 7260 B/A FC-NS is a thixotropic 2-part structural epoxy adhesive designed for high-strength, toughened bonding of metals and composites. Ideal for demanding industrial applications with high temperature and dynamic stress.
- Pack size: 400 ml dual cartridge (3M ID 7000080037)
Applications
- Structural bonding of steel, aluminium and composites (e.g. SMC, pultruded profiles)
- Ideal for applications with thermal loads, vibration or impact
- Thixotropic consistency for precise vertical application
Key Features
- Toughened formulation with high peel and shear strength – also at elevated temperatures
- Excellent resistance to oils, water, cleaners, diesel, etc.
- Working time: approx. 90 minutes (20 g mix)
- Service temperature: -55 °C to +120 °C (tested up to +200 °C)
- Cures at room temperature or accelerated at up to 65 °C
Technical Data
| Chemical base | Modified epoxy / modified amine |
| Consistency | Thixotropic (non-sag) |
| Colour (base / hardener) | Black / off-white |
| Density | Base: 1.27–1.35 g/cm³ Hardener: 1.24–1.32 g/cm³ |
| Viscosity (23 °C) | Base: 700–900 Pa·s Hardener: 350–550 Pa·s |
| Mix ratio | Volume: 2:1 Weight: 100:45 |
| Working time (20 g) | Approx. 90 minutes |
| Tensile strength (Aluminium, 23 °C) | Approx. 34 MPa (cohesive failure) |
| Roller peel strength (Aluminium, 23 °C) | Approx. 145 N / 25 mm |
| Temperature resistance | -55 °C to +120 °C (tested up to +200 °C) |
| Impact resistance (23 °C) | Up to 40.2 kJ/m² (stainless steel) |
| Flammability / smoke rating | F1 / M1 according to NF F 16-101 / -102 |
| Shelf life | Min. 24 months at 20 °C in unopened packaging |
Application Notes
- Clean and mechanically pre-treat substrates (e.g. grinding, MEK, IPA)
- Mix components in 2:1 volume ratio thoroughly
- Apply with spatula, dispenser or dual-cartridge dispenser
- Clamping recommended; cure at room temperature or accelerated with heat
- Clean fresh adhesive with ketone-based solvents (e.g. MEK)
Recommended Accessories
Storage & Safety
- Store in original packaging at approx. 20 °C and 50 % RH
- Refer to Safety Data Sheet (R34, R36/38, R43, R51/53)
3M Scotch-Weld 7260 FC NS, structural adhesive, 2K epoxy, toughened, black, high-temperature, thixotropic
Hazard Information (CLP)
Signal Word: Danger / Warning
Hazard Statements (H-Phrases)
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H410: Very toxic to aquatic life with long-lasting effects.
Safety Precautions (P-Phrases)
Prevention:
- P260A: Do not breathe vapour.
- P280D: Wear protective gloves/protective clothing/eye protection/face protection.
- P273: Avoid release to the environment.
- P280E: Wear protective gloves.
Response:
- P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER or doctor/physician.
- P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
- P391: Collect spillage.
Product Identifier
- 3,3′-Oxybis(ethylenoxy)bis(propylamine): CAS No. 4246-51-9, EC No. 224-207-2, 15-40%
- 2-Propennitrile, Polymer with 1,3-Butadiene: CAS No. 68683-29-4, 5-20%
- 2,4,6-Tris(dimethylaminomethyl)phenol: CAS No. 90-72-2, EC No. 202-013-9, 3-7%
- 2-Piperazin-1-ylethylamine: CAS No. 140-31-8, EC No. 205-411-0, < 1%
- Reaction mass of 2,2′-[Methylenbis(2,1-phenylenoxymethylene)]bis(oxirane): EC No. 701-263-0, 15-40%
- 4,4′-Methylenediphenyl diglycidyl ether: CAS No. 1675-54-3, EC No. 216-823-5, 10-30%
- 1,4-Bis[(2,3-epoxypropoxy)methyl]cyclohexane: CAS No. 14228-73-0, EC No. 238-098-4, 5-10%
Other Hazards
- This material does not contain substances classified as PBT or vPvB.
- Contains 4% components with unknown hazards to aquatic life (Part A).
- Contains 26% components with unknown hazards to aquatic life (Part B).
Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,
3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, [email protected], www.3m.com/msds
Additional information
| Property | – |
|---|
7 reviews for 3M Scotch-Weld 7260 FC NS Two-part Epoxy Adhesive non-sag black 400ml
Add a review
JUST INQUIRING?
No stress, drop a message
Related Products
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
Élise –
Surprisingly good quality for the price. Easy to use, without making a mess.
Nathan –
Reliable and stable. No issues at all so far. Quality is excellent.
Lily –
Pleasant to use at home.
Damien I. –
Fits perfectly. Arrived as promised.
Arianna –
Super fast delivery, thank you. Pleasant to use at home.
noah_s –
Great customer support. Packaging was excellent. Everything was smooth and fast. Very fast shipping.
Sandrine U. –
A friend recommended it; I’m very happy with the purchase.