Loctite 589 Threadlocker high strength, low-viscosity 250ml bottle

LOCTITE® 589 is a green, low-viscosity, dimethacrylate ester, acrylic, threadlocking adhesive. Demonstrates high-strength capability.

• Pack size: 250 ml bottle (Loctite no. 234596)

Application

• The product is used to lock and seal fine-threaded nuts, bolts and studs in a wide variety of applications
• LOCTITE 589 is also used to seal porosity in welds, castings and powdered metal parts
• Suitable for metal-to-metal applications, particularly on inactive metals (e.g., stainless steel, plated surfaces) when used with an activator

Characteristics 

• Prevents loosening due to vibration, shock, or thermal expansion.
• Protects threads from rust and corrosion.
• Operates reliably in range of -54°C to 149°C (-65°F to 300°F)

Technical specifications

Notes

This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. For safe handling information on this product, consult the Safety Data Sheet (SDS). Where aqueous washing systems are used to clean the surfaces before bonding, it is important to check for compatibility of the washing solution with the adhesive. In some cases these aqueous washes can affect the cure and performance of the adhesive. This product is not normally recommended for use on plastics (particularly thermoplastic materials where stress cracking of the plastic could result). Users are recommended to confirm compatibility of the product with such substrates.

Directions for use:

For Assembly
1. For best results, clean all surfaces (external and internal) with a LOCTITE® cleaning solvent and allow to dry.
2. If the material is an inactive metal or the cure speed is too slow, spray all threads with Activator 7471™ or 7649™ and allow to dry.
3. Shake the product thoroughly before use.
4. To prevent the product from clogging in the nozzle, do not allow the tip to touch metal surfaces during application.
5. For Thru Holes, apply several drops of the product onto the bolt at the nut engagement area.
6. For Blind Holes, apply several drops of the product down the internal threads to the bottom of the hole.
7. For Sealing Applications, apply a 360° bead of product to the leading threads of the male fitting, leaving the first thread free. Force the material into the threads to thouroughly fill the voids. For bigger threads and voids, adjust product amount accordingly and apply a 360° bead of product on the female threads also.
8. Assemble and tighten as required.
For Disassembly
1. Remove with standard hand tools.
2. In rare instances where hand tools do not work because of excessive engagement length, apply localized heat to nut or bolt to approximately 250 °C. Disassemble while hot.
For Cleanup
1. Cured product can be removed with a combination of soaking in a LOCTITE® solvent and mechanical abrasion such as a wire brush. 

Storage

Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. 

Hazard Information (CLP)

Signal word: Warning

Hazard Statements (H-phrases)

• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H412: Harmful to aquatic life with long-lasting effects.

Additional Information

• Contains: Methyl methacrylate – May cause allergic reactions.

Precautionary Statements (P-phrases)

For private consumers:

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P501: Dispose of contents/container in accordance with local regulations.

Prevention:

• P261: Avoid breathing vapour.
• P273: Avoid release to the environment.

Response:

• P337+P313: If eye irritation persists: Get medical advice/attention.

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com