KD-CHECK SD-1 Wet developer for crack detection ISO 3452-2 500ml Spray
€ 15,54
- Description
- FAQ
- Additional information
- Reviews (6)
Description
Karl Deutsch KD-CHECK SD-1 solvent-based wet developer spray is used for any test equipment system for non-destructive testing of surface cracks and pores using the dye penetration test method.
Application
- For crack detection on almost all metallic and non-metallic material surfaces, e.g. steel, plastic, aluminum, brass (suitability for plastics must be checked beforehand)
- Crack detection system approved to DIN EN ISO 3452 in accordance with TRGS 614
- After intermediate cleaning (KD-Check PR-1) and drying, a thin film of white wet developer is applied
- After a processing time (5 – 10 minutes) the dye penetrant (e.g. KD-CHECK RDP-1) is drawn out and becomes visible as a red trace
Characteristics
- Solvent-based wet developer
- Developer for form d and e
- Basis: alcohol/acetone
- Application by spray can and electrostatic spraying
- Fast drying
- Forms a fine and uniform developer layer
- Excellent contrast of background and crack indication
- Easy to remove from test surfaces
- Low sulfur and halogen content according to DIN EN ISO 3452-2 and ASME Code, Section V, Article 6
- Can be used in a temperature range from -30 °C to +50 °C
- Type-tested according to DIN EN ISO 3452-2 and -6, approved according to AREVA NP TLV 9017
- Listed on QPL-AMS 2644
- Size: 500ml
- Packaging type: aerosol spray
Hazard Warnings (CLP)
Signal word: Danger
Hazard Statements (H-phrases)
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
Supplemental Hazard Information
- EUH066: Repeated exposure may cause skin dryness or cracking.
Safety Statements (P-phrases)
Prevention:
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211: Do not spray on an open flame or other ignition source.
- P251: Do not pierce or burn, even after use.
- P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
Storage:
- P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
Disposal:
- P501: Dispose of contents/container to hazardous waste.
Other Hazards
- No data available.
Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,
Â
KARL DEUTSCH Prüf- und Messgerätebau GmbH + Co KG, Otto-Hausmann-Ring 101, 42115 Wuppertal, GERMANY, +49 202 7192 0, [email protected], www.karldeutsch.de
Additional information
| Property | – |
|---|
6 reviews for KD-CHECK SD-1 Wet developer for crack detection ISO 3452-2 500ml Spray
Add a review
JUST INQUIRING?
No stress, drop a message
Related Products
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
jonathan_s –
Top product, top price. Robust and well-made.
Marco –
Received in perfect condition.
massimo_it –
Delivery faster than expected. Everything OK. Everything perfect, thank you.
Giovanni –
Perfect job, thanks.
tommaso_it –
Arrived without any defect.
hannah_91 –
Very effective, I noticed a change in just a week. Excellent product, worth every cent. Perfect for my needs; I couldn’t be happier. Easy to use, without making a mess.