Belzona 1161 Super UW-Metal Two-part Epoxy-based Repair Composite 1kg

 335,94

SKU: ID6d5e5d0ea7

Belzona 1161 Super UW-Metal Two-part Epoxy-based Repair Composite 1kg

 335,94

In stock

Description

  • A 2-part composite material for metal repair and resurfacing based on a 100% solids, surface-tolerant epoxy resin reinforced with silicon steel alloy.
  • This composite material is specifically designed for application to wet and oil contaminated surfaces, as well as for underwater applications.
  • It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.
Applications
  • Repair of oil and water leaks
  • Sealing of joints and flanges
  • Repair of cracks and holes on engine and pump casings, transformers, pipes, tanks and other equipment
  • Resurface of pitted metal surfaces
  • High strength structural adhesive for metal bonding
  • Creation of irregular load bearing shims and reforming of bearing housings
  • Application should ideally occur in the following ambient temperature range: 5°C to 40°C
  • The volume capacity of mixed material is 428 cm3 (26.1 in3)/kg.
Characteristics
  • Bonds strongly to wet, oily and manually prepared surfaces
  • Multi-purpose durable repair composite
  • Application and cure at room temperature and underwater – no hot work involved
  • Excellent bonding to metals including stainless steel, carbon steel, aluminium, brass, copper and other rigid surfaces
  • Fully machinable using conventional tools
  • Excellent electrical insulation characteristics
  • Reduced health and safety risks as it is 100% solids
  • No shrinkage, expansion or distortion
  • Outstanding corrosion protection
  • Excellent chemical resistance against a wide range of chemicals
Technical specifications
Base Component
Colour Dark Grey
Form Paste
Density 2.80 g/cm3
Gel Strength (HF paddle) >150 g/cm
Solidifier Component
Colour Light Grey
Form Paste
Density 1.40 g/cm3
Gel Strength (QV paddle) 90 g/cm
Mixed Properties
Mixing Ratio by Weight (Base : Solidifier) 4 : 1
Mixing Ratio by Volume (Base : Solidifier) 2 : 1
Colour Grey
Mixed Form Paste
Mixed Density 2.34 g/cm3
Slump Resistance >0.5 in / >12.7 mm
VOC (ASTM D2369) 0.10 % / 2.39 g/L

Hazard Information (CLP)

 

Signal word: Warning

Hazard Statements (H-phrases)
  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements (P-phrases)
Prevention:
  • P273: Avoid release to the environment.
  • P280: Wear protective gloves, clothing and eye protection.
Disposal:
  • P501: Dispose of contents/container in accordance with local regulations.
Other relevant information
  • Contains: Phenol Novolac Epoxy Resin, Epoxy resins (average molecular weight ≤ 700).
Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

 

Information on product safety (Manufacturer, Contact)

Belzona Technik West GmbH, Cerestarstrasse 2, 47809 Krefeld, GERMANY, +49 2151 724038, [email protected], www.belzonatechnikwest.de

Downloads

Additional information

Property

7 reviews for Belzona 1161 Super UW-Metal Two-part Epoxy-based Repair Composite 1kg

  1. federico_it

    Exactly as described. Clear recommendation. Everything as expected.

  2. aaron_99

    Durable product. Fast shipping, perfect product. Works great.

  3. Michele

    Impeccable service.

  4. benedikt88

    Easy to use and very practical. Fast and secure delivery.

  5. Aaron

    Everything OK, recommended.

  6. Clara

    No unpleasant smell, which I really appreciate.

  7. Franziska B.

    Very effective, I noticed a change in just a week. Very satisfied, it’s even better than I expected.


Add a review

JUST INQUIRING?

No stress, drop a message

    You are inquiring about:

    Related Products