Perma CLASSIC 120 Single-point lubricator with grease Microlube GL 261

Perma CLASSIC 120 cm³ automatic single-point lubricator with grease Microlube GL 261 | N° 100316

Special lubricating greases for boundary friction conditions and tribo-corrosion  Microlube GL 261

• Optimum lubrication in the boundary friction regime, thus preventing machine downtime due to tribo-corrosion
• Tried-and-tested for many years and approved by OEMs
• Longer component life due to special additives, especially with oscillations and micro-movements
• Trouble-free operation of machines due to good pumpability in central lubrication systems

Technical specifications

• Chemical composition, thickener special lithium soap
• Chemical composition, type of oil mineral oil
• Lower service temperature -30 °C / -22 °F
• Upper service temperature 140 °C / 284 °F
• Color space yellow
• Appearance almost transparent
• Texture homogeneous
• Texture fibrous
• Density at 20 °C approx. 0.89 g/cm³

Applications

• MICROLUBE GL 261, GL 262 greases are particularly suitable for low to medium-speed plain and rolling bearings, and for swivel movements and vibrations.

Perma CLASSIC 120 Automatic lubrication system

• Perma CLASSIC is a single-point lubrication system for roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains, etc.
• Operates at ambient temperatures between 0 up to +40 °C.
• Typical applications can be found in mining, steel, automotive and mechanical engineering.
• The reliable operating principle is based on an electrochemical reaction.
• The lubrication period is determined by color coded activator screws.
• Depending on your application’s requirement, you may choose to discharge 120 cm³ in a period of 1, 3, 6 or 12 months.
• The activator screw generates pressure (max. 4 bar) which moves the piston forward and continuously injects small lubricant amounts into the lubrication point
• Perma CLASSIC is fully dust and water proof and can withstand impacts and accidental knocks.

Note: For each Classic 120 dispenser you need an activator screw, which you can order under the links below:
 

perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0, [email protected]