Klüberpaste UH1 96-402 High-temp paste for food-processing 400ml spray

 55,14

SKU: IDe94c2557b3

Klüberpaste UH1 96-402 High-temp paste for food-processing 400ml spray

 55,14

In stock

Description

Klüberpaste UH1 96-402 Spray Light-coloured high-temperature paste for the food-processing and pharmaceutical industries | N° 081254
  • Klüberpaste UH1 96-402 is a high-temperature paste designed for versatile assembly purposes in hygienically sensitive environments. It contains fully synthetic base oils and a special blend of ceramic solid lubricants.
  • Across the “normal” temperature range up to approx. 160 °C, Klüberpaste UH1 96-402 is a water-resistant lubricating and assembly paste providing good adhesion on metals.
  • Under permanently higher temperatures up to 1200 °C, its solid lubricating particles provide protection against tribocorrosion or fretting corrosion.
  • Temperature range: -30°C to +1200°C 
  • Volume: 400ml spray can
  • Also available in: 600g cartridge, 750g can, 30kg pail
Benefits for your application
  • Reliable dry lubrication at temperatures from 200 °C to 1200 °C
  • Good adhesion to the friction point, also when subject to humidity
Applications
  • Klüberpaste UH1 96-402 Spray is suitable for a variety of friction points in food-processing and pharmaceutical machines which are subject to high loads –
    • as an assembly paste for transition and loose fits to prevent fretting corrosion
    • as a paste for screw connections based on high-alloy steels to optimise the tightening torque and demounting, even after long operating periods
    • as a long-term lubricant for low-speed guide rails, hinges, rollers, etc.
Application notes
  • Shake well before use. Ensure sufficient ventilation during spraying as explosive mixtures may form.
  • Do not spray against naked flame or onto hot or incandescent objects.
  • Do not use spray in confined areas, e.g. control cabinets.
  • Observe additional instructions for use in material safety data sheet and on can label. Before applying Klüberpaste UH1 96-402 Spray, all lubrication points should be thoroughly cleaned using e.g. Klüberfood NK1 Z 8-001 Spray, to ensure maximum hygiene conditions exist, mandatory for food-safe H1 lubrication. Protect product against direct sunlight and temperatures above 50 °C.
Technical specifications
 Lower service temperature  -30 °C / -22 °F
 Upper service temperature  1200 °C / 2192 °F
 NLGI grade, DIN 51818  2
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C  approx. 360 mm²/s
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C  approx. 57 mm²/s
 Four-ball tester, welding load, DIN 51350 pt. 04  >= 2 500 N
 Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating  <= 1 – 90
 Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened
original container, approx.
 24 months

Hazard Information (CLP)

    

Signal word: Danger

Hazard Statements (H-Sets)
  • H222: Extremely flammable aerosol.
  • H229: Pressurized container: May burst when heated.
  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H336: May cause drowsiness or dizziness.
  • H411: Toxic to aquatic life with long-lasting effects.
Precautionary Statements (P-Sets)
Prevention:
  • P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
  • P211: Do not spray on an open flame or other ignition source.
  • P251: Do not pierce or burn, even after use.
  • P273: Avoid release to the environment.
Response:
  • P301 + P310: IF SWALLOWED: Immediately call Poison Center/Doctor.
  • P331: Do NOT induce vomiting.
Storage:
  • P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F.
Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Additional information

Property

13 reviews for Klüberpaste UH1 96-402 High-temp paste for food-processing 400ml spray

  1. sophie_rose

    Not too big, not too small, just right. No unpleasant smell; I really like that.

  2. lotta_ma

    Packaging slightly damaged, but the product is excellent. Not too big, not too small, just right. Really noticed a difference after using it! This solved my problem completely!

  3. Chiara

    Great product, worth every cent. Better than anything I’ve tried before.

  4. Rafael J.

    Arrived as promised. Everything in order.

  5. Yann

    Perfect match with the description. Great service, thank you. Received quickly.

  6. francesco_s

    Works great. Top quality, fast delivery.

  7. alessia_roma

    The quality surprised me in a good way. Easy to use, no mess at all.

  8. ilaria88

    Perfect for my needs; I’m very satisfied. Very satisfied, better than expected. I was skeptical, but now I’ll order regularly. No unpleasant smell, which I really appreciate.

  9. vincent_fr

    Really good value for money. Quality is excellent. Better quality than I expected. As expected, top-notch.

  10. Cristiano

    Excellent-quality product.

  11. jackson88

    Very functional.

  12. Sarah T.

    Solved my problem completely! The quality surprised me in a good way. I was skeptical, but now I’ll order regularly. Looks even nicer in real life.

  13. veronica88

    Perfect for my needs, couldn’t be happier. I’ve been using it for 2 weeks and already see results! Looks even nicer in real life.


Add a review

JUST INQUIRING?

No stress, drop a message

    You are inquiring about:

    Related Products