Klüber Summit SH 68 Synthetic air compressor oil 20l canister
€ 956,86
- Description
- FAQ
- Additional information
- Reviews (5)
Description
Klüber Summit SH 68 Synthetic air compressor oils | N° 050006
- Klüber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives.
- They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.
- Pack sizes: canister 20 l
Benefits for your application
- Low maintenance and operating costs due to extended oil change intervals up to 10,000 operating hours in oilinjected screw-type compressors
- Easy compressor oil conversion due to neutral behaviour of oils towards seals
- Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
- Longer servie life of the oil filters, activated carbon filters and oil separators
- Low formation of oxidation residues in the oil circuit, reduced operating costs due to extended oil filter and
separator life - Reduction of energy costs due to more energy efficient operation
Applications
- Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours.
- Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils.
- They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected.
Application notes
- When selecting the oil viscosity for air compressors please observe the manufacturers’ instructions. When switching a used compressor to a Klüber Summit SH oil, drain old oil from whole circuit of compressor while still warm.
- We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit SH oil.
Technical specifications
| Appearance | clear |
| Density, DIN 51757, 20 °C | approx. 0.86 g/cm³ |
| Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C |
approx. 68 mm²/s |
| Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C |
approx. 9.8 mm²/s |
| Viscosity index, DIN ISO 2909 | >= 115 |
| Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus |
>= 240 °C |
| Pour point, DIN ISO 3016 | <= -36 °C |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Additional information
| Property | – |
|---|
5 reviews for Klüber Summit SH 68 Synthetic air compressor oil 20l canister
Add a review
JUST INQUIRING?
No stress, drop a message
Related Products
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
Giorgia X. –
Easy to use, no mess at all. Better than anything I’ve tried before. Packaging was slightly damaged, but the product is excellent. I was skeptical, but now I’ll order regularly.
romane_75 –
Packaging was slightly damaged, but the product is excellent. Looks even nicer in real life.
Layla –
Looks even nicer in real life. Surprisingly good quality for the price. I’ve been using it for 2 weeks and I already see results! A friend recommended it and I’m so glad I ordered.
Gabriele B. –
Quality is excellent. Very fast shipping. Practical and useful.
Margaux W. –
I noticed a difference after a short time!