Klüberbio LG 39-701 N Biodegradable grease for open gear drives 25kg

Klüberbio LG 39-701 N Eco-compatible operating lubricant for open gear drives | N° 009050

• Klüberbio LG 39-701 N is a high-performance grease with a new type of base oil and additive package. It combines very good eco-friendliness with high load-carrying capacity, good antiwear and anticorrosive effect and excellent adhesion to surfaces.
• The high-viscosity base oil of Klüberbio LG 39-701 N comes from 100 % renewable resources.
• Klüberbio LG 39-701 N complies with the 2013 Vessel General Permit requirements of the Environmental Protection Agency (EPA) in terms of biodegradability, minimal toxicity and bio-accumulation to be met by Environmentally Acceptable Lubricants.
• Volume: bucket 25 kg
• Also available in: can 1 kg, bucket 18 kg, barrel 180 kg

Benefits for your application

• Complies with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 GP (Vessel General Permit)
• Lower environmental impact in the event of leakage. The base oil consists of renewable raw materials and is ultimately biodegradable
• Good low-temperature behaviour enables operation of open gear drives in cold conditions
• Selected additives ensure longer component life and reduced wear
• Cost reduction due to low consumption when applied by selected spraying systems
• Meets requirements for OSPAR conformance, registered in Denmark, Norway, Netherlands and Great Britain

Application

• Klüberbio LG 39-701 N was developed for the lubrication of open gear drives and rack-and-pinion drives as well as for lubrication of rudder stocks and sliding surfaces with high surface pressure.
• The product can be used in maritime applications requiring good eco-compatibility, a good anticorrosive effect and/or high loadcarrying capacity, e.g. in open anchor winch drives, rack and pinions in jack-up lifting systems, slow-moving plain bearings, stern roller bearings on AHTS vessels or rudder systems.

Application notes

• Klüberbio LG 39-701 N can be continuously applied by means of transfer pinion lubrication, spray systems, automatic greasing systems or by brush.
• The required lubricant quantity and the upper service temperature range depend on the operating conditions in each individual application. Our sales engineers will be pleased to advise you.

Technical specifications

Klüberbio LG39-701N, Klüberbio LG 39 701 N

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com