



Klübersynth VR 69-252 N Lubrication valve grease 1kg can
5 out of 5
€ 91,14
SKU: IDb82be272fb

Klübersynth VR 69-252 N Lubrication valve grease 1kg can
€ 91,14
In stock
- Description
- FAQ
- Additional information
- Reviews (6)
Description
Klübersynth VR 69-252 N Special lubricating grease for drinking water taps containing e.g. EPDM and/or NBR elastomers | N° 012273
- Klübersynth VR 69-252 N is a tailor-made, highly adhesive, light-colored lubricating grease based on fatty oil, calcium soap and PTFE.
- With a carefully selected combination of active substances, this lubricant offers very good performance and high functionality combined with a long service life.
- Klübersynth VR 69-252 N clearly surpasses the load alternation requirement of 200,000 cycles at a closing force of 2.5 Nm and is therefore in full compliance with the European standard DIN EN 200.
- Klübersynth VR 69-252 N meets the new drinking water and plastics guideline (KTW) of the German Umweltbundesamt (Federal Environmental Agency) and conforms to the current French positive list for drinking water applications ACS.
- Temperature range: -20°C to +100°C
- Volume: Can 1 kg
- Also available in: Bucket 5 kg, Bucket 25 kg, Drum 180 kg
Benefits for your application
- Longer component life due to less friction and wear, especially in brass spindle valves.
- Prevention of stick-slip at high tightening torques and 500,000 load cycles.
- A lubricant for all components meeting all technical, design and chemical requirements, e.g. the BWGL-KTW (UBA- guideline) and the French ACS Guidelines.
- Cost-saving as lubricant can be applied by brush or using fully automatic mass application techniques.
Applications
- Klübersynth VR 69-252 N is used for the lubrication of all friction points in valves subject to mechanical loads and in some cases also for ceramic valves containing EPDM or NBR elastomers.
- Further applications are in locking and control valves such as plug or ball valves, flaps, slides or other valves,
and in shower and heating valves and fittings.
Application notes
- Klübersynth VR 69-252 N can be easily applied by means of brush, sponge, spatula, grease gun or other usual metering equipment.
Technical specifications
Article number | 122730037 |
Colour space | beige |
Density at 20 °C | approx. 0.97 g/cm³ |
Lower service temperature | -20 °C / -4 °F |
Upper service temperature | 100 °C / 212 °F |
NSF H1 registration number | 152147 |
Flow pressure of lubricating greases, DIN 51805, test temperature: -20 °C | <= 1 400 mbar |
Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 280 x 0.1 mm |
Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 310 x 0.1 mm |
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit |
4000 mPas |
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit |
8000 mPas |
Copper corrosion, DIN 51811, 24 h, 100°C | 1 – 100 – 24 corrosion degree |
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Klübersynth VR69-252N, Klübersynth VR 69-252N, Klübersynth VR 69252N
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Additional information
Property | – |
---|
JUST INQUIRING?
No stress, drop a message
Related Products


This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page


This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page


This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page


This product has multiple variants. The options may be chosen on the product page
Select optionsThis product has multiple variants. The options may be chosen on the product page
Greases for fittings
Klüberalfa YV 93-302 Sliding agent for valves and fittings 1kg can
5 out of 5
€ 3118,80
carlo_s –
Fast shipping and good quality. Better than I thought; I’m satisfied.
rosa_s –
Very effective, I noticed a change in just a week. Great product, worth every cent.
romane_75 –
I was skeptical, but now I’ll order regularly. The quality pleasantly surprised me. Surprisingly good quality for the price. Packaging slightly damaged, but the product is excellent.
emma_roma –
Really noticed a difference after using it! Feels nice to use at home. Surprisingly good quality for the price. The quality pleasantly surprised me.
elena_bella –
Pleasant to use at home. Feels nice to use at home.
jonathan_s –
Very satisfied with the purchase. Impeccable service.